Coolrunner Question

XBOX NAND rad/write.
Post Reply
yahooking
Junior Member
Posts: 24
Joined: Mon Jun 07, 2010 2:46 pm

Coolrunner Question

Post by yahooking »

Can we use jtagnt on
XECUTER COOLRUNNER
?
I see some threads on here talking about the xilinx and it is in the jtagnt software but wanted to know if we can program the XECUTER COOLRUNNER from our jtagnt device.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

yahooking wrote:Can we use jtagnt on
XECUTER COOLRUNNER
?
I see some threads on here talking about the xilinx and it is in the jtagnt software but wanted to know if we can program the XECUTER COOLRUNNER from our jtagnt device.
Can you give more detail? Xilinx is added recently. The JTAG NT should support all the CPLD programming with proper file.
yahooking
Junior Member
Posts: 24
Joined: Mon Jun 07, 2010 2:46 pm

Post by yahooking »

Hi i dont know if i can get you any chip specific information as the chip does not have writing on it.
Here is a picture of the device.
http://www.colourful-zone.com/Store/ima ... nner_1.jpg
yahooking
Junior Member
Posts: 24
Joined: Mon Jun 07, 2010 2:46 pm

Post by yahooking »

I believe the chip is XC2C32A
and the datasheet for it can be found at.
http://www.xilinx.com/support/documenta ... /ds310.pdf
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Should have no problem program it. Generate the JAM file from the tool and you should be OK.
yahooking
Junior Member
Posts: 24
Joined: Mon Jun 07, 2010 2:46 pm

Post by yahooking »

What program will do this ? I have the jed files and xsvf only.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

The tool from Xlinx should have the option generate JAM or STAPL file.
yahooking
Junior Member
Posts: 24
Joined: Mon Jun 07, 2010 2:46 pm

Post by yahooking »

I wasn't able to get JAM but i got the STAPL file created using the xilinx tools.
Can this fiel work directly with usbjtagnt ?
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

yahooking wrote:I wasn't able to get JAM but i got the STAPL file created using the xilinx tools.
Can this fiel work directly with usbjtagnt ?
Yes that should be OK.
yahooking
Junior Member
Posts: 24
Joined: Mon Jun 07, 2010 2:46 pm

Post by yahooking »

great thanks so much for your help. The chip also asks me to connect VCC from jtag what pin on the usbjtagnt can be used ? i have matched up all others excent for this vcc pin.
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests