extraer de un FULL DUMP 6120 / DPC3000 Certificados

SB6XXX,SBV6XXX
Post Reply
edushmix
Junior Member
Posts: 23
Joined: Wed Mar 25, 2015 8:56 pm
Location: Rosario

extraer de un FULL DUMP 6120 / DPC3000 Certificados

Post by edushmix »

Hola que tal tengo un MOTOROLA 6120 que le puse FORCEWARE 1.4 mod 2. Pero a su vez tengo un full dump de un DPC 3000 funcionando. Podría sacar los certificados para ponerlos al 6120? hay algún método? espero puedan ayudarme. Gracias de ante mano
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

edushmix wrote:Hola que tal tengo un MOTOROLA 6120 que le puse FORCEWARE 1.4 mod 2. Pero a su vez tengo un full dump de un DPC 3000 funcionando. Podría sacar los certificados para ponerlos al 6120? hay algún método? espero puedan ayudarme. Gracias de ante mano
Si se puede hacer, pero no de la manera que tu lo estas visualisando.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
d0
Junior Member
Posts: 177
Joined: Thu Feb 26, 2009 9:50 am
Location: S FL
Contact:

Post by d0 »

Can we use UJModem for this? Or there was also a linux tool set i remember about.
EDIT: This one http://www.usbjtag.com/filedownload/imagetool.php
EDIT: Best way through SFTP.
hr23-700
Junior Member
Posts: 59
Joined: Fri Jan 28, 2011 2:27 am

Post by hr23-700 »

hi i have same q???? i have a fullflash from a sb6141 that i would like to extract the config and cert,,,,can somebody help please
ricktendo
Junior Member
Posts: 133
Joined: Sat Nov 29, 2014 12:41 pm

Post by ricktendo »

hr23-700 wrote:hi i have same q???? i have a fullflash from a sb6141 that i would like to extract the config and cert,,,,can somebody help please
You can flash forceware and grab the certs via ssh, or you can flash komodo diag and do it via ssh and/or snmp
ricktendo
Junior Member
Posts: 133
Joined: Sat Nov 29, 2014 12:41 pm

Post by ricktendo »

Here are the easiest instructions using SNMP

http://www.forocable.com/foro/threads/8 ... post500176

You can also use TFTPD32 (use 'ls' command to get the filenames)

Code: Select all

cd /nvram/1/security

tftp -l mfg_cert.cer -p <ip> 1069
tftp -l cm_cert.cer -p <ip> 1069
tftp -l cm_key_prv.bin -p <ip> 1069
tftp -l mfg_key_pub.bin -p <ip> 1069
tftp -l root_pub_key.bin -p <ip> 1069

cd /nvram

tftp -p -r config.cm <ip> 1069
universall
Junior Member
Posts: 173
Joined: Sat Oct 21, 2006 11:04 pm

will these cmd work for putty as well??

Post by universall »

Can I use these same cmd for putty/ssh?
ricktendo wrote:Here are the easiest instructions using SNMP

http://www.forocable.com/foro/threads/8 ... post500176

You can also use TFTPD32 (use 'ls' command to get the filenames)

Code: Select all

cd /nvram/1/security

tftp -l mfg_cert.cer -p <ip> 1069
tftp -l cm_cert.cer -p <ip> 1069
tftp -l cm_key_prv.bin -p <ip> 1069
tftp -l mfg_key_pub.bin -p <ip> 1069
tftp -l root_pub_key.bin -p <ip> 1069

cd /nvram

tftp -p -r config.cm <ip> 1069
d0
Junior Member
Posts: 177
Joined: Thu Feb 26, 2009 9:50 am
Location: S FL
Contact:

Post by d0 »

for SSH you should use SCP, SFTP to transfer using FTP Client over SSH2.
ricktendo
Junior Member
Posts: 133
Joined: Sat Nov 29, 2014 12:41 pm

Post by ricktendo »

universall wrote:Can I use these same cmd for putty/ssh?
Yes that is what those are for, run tftp32 and putty and you can grab those certs. There is an easier way to do it, but you need Binwalk installed in Linux
d0
Junior Member
Posts: 177
Joined: Thu Feb 26, 2009 9:50 am
Location: S FL
Contact:

Post by d0 »

why not just use SCP or SFTP?
universall
Junior Member
Posts: 173
Joined: Sat Oct 21, 2006 11:04 pm

Post by universall »

ricktendo wrote:Yes that is what those are for, run tftp32 and putty and you can grab those certs. There is an easier way to do it, but you need Binwalk installed in Linux
Thanks for the response what are the commands if I am using putty with a ftp?
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests