SB6120: detect, but NO ERASE and NO WRITE...

[lamp]

.

Checked and rechecked the connections
of the Mr. CAPONE.

Don't detect...

.

[CAPONE]

.

Checked and rechecked the connections
of the Mr. CAPONE:

Don't detect...

.

Sorry Wire 1 should be Wire 2. The rest are OK.
Wire 2 to Pin 10 of Flash and Wire 1 Is to ISP..............

Here it is Corrected.

[lamp]

.

Sorry Wire 1 should be Wire 2. The rest are OK.
Wire 2 to Pin 10 of Flash and Wire 1 Is to ISP.

I don't understand...
NT wire 1 to -B (ground) and pin 10 flash?

NT wire 2 to -B (ground). Pin 10 flash too to -B (ground)

Then: wire 1 NT and wire 2NT more pin10 flash all to -B (ground)!

.

[CAPONE]

.





I don't understand...
NT wire 1 to -B (ground) and pin 10 flash?

NT wire 2 to -B (ground). Pin 10 flash too to -B (ground)

Then: wire 1 NT and wire 2NT more pin10 flash all to -B (ground)!

.

Fuck DUDE, Whats so dificult to understand???????????? First Picture I made Mistake.....................
Follow wireing on Last Picture I posted.
Wire 2 from USBJTAG NT is GROUND

WIRE 1 GOES TO ISP

For the Sounds of it you may be well adviced to FIND ANOTHER HOBBY......

[lamp]

.

My philosopher friend is very nervous!

When gives me wrong information
I'm not nervous, even losing my
precious time! He, he, he! : )

Thank you for the beautiful girl of the support
technician! When the fuck, I would rather
fuck her.

Calm down, man, calm down!

NT wire 1 to ISP?
What do you mean by that? What is ISP?
Forgot that flash memory is not in the board?

.

[CAPONE]

.

My philosopher friend is very nervous!

When gives me wrong information
I'm not nervous, even losing my
precious time! He, he, he! : )

Thank you for the beautiful girl of the support
technician! When the fuck, I would rather
fuck her.

Calm down, man, calm down!

NT wire 1 to ISP?
What do you mean by that? What is ISP?
Forgot that flash memory is not in the board?

.

The You DON'T Need to Use wire 1. LOL. Glad you Like the Picture. They make thread FUNNY, For Me at least. LMFAO.

If Flash is not on Board Foget Wire 1 Just use the rest. and Ground from external Power goes to pin 10 along wirh wire 2 from JTag.

[lamp]

.

The You DON'T Need to Use wire 1

Should I start considering that the memory is dead ...
No detect.



.

[CAPONE]

Maybe. At this point why not jus tinstall al new flash............
What is streange is that you was able to detect it while it was on the motherboard. so there should be no reason for it NOT to Detect Now.

[lamp]

.

Maybe. At this point why not jus tinstall al new flash............
What is streange is that you was able to detect it while it was on the motherboard. so there should be no reason for it NOT to Detect Now.

Indeed, while in the board could detect and read it ...

The next step is to go in search of a memory to buy!

Many shits may have happened since the withdrawal. Starting with rework - maybe overheat (I don't have hot air)... Or a wrong connection ...

Anyway, let's try to buy another memory!

Stay my thanks to your efforts (and the laughter that I gave when gets you nervous!), and also to Mr. BDM!

You are brilliant!

.

[Koevoet]

With your SPI chip out of Situe , you need to connect VCC and #HOLD together otherwise you will not get a detection.

Regards

[lamp]

.

you need to connect VCC and #HOLD
Regards

Thanks for the interest in help me!

Pin1 and pin2 of the memory to +B (3.3v), correct?

Don't detect...

I am convinced that the memory is dead.

.

[Koevoet]

Have you verified your connection by buzzing them out with a multimeter , to check they are going to the correct points on your NT and also making contact ?

There is no need for the GND connection from your External programmer to the Chip.

These chips are Hard to Brick unless you heated it to much when you removed it from the board.

Regards

[CAPONE]

.



Thanks for the interest in help me!

Pin1 and pin2 of the memory to +B (3.3v), correct?

Don't detect...

I am convinced that the memory is dead.

.

By # He means Pin 9 of Flash. Look At Picture.

[lamp]

.

There is no need for the GND connection from
your External programmer to the Chip.

Please, Mr. Koevoet, re-check:

NT device:
1 not conected
2 not conected
3 to 15 flash
4 not conected
5 to 8 flash
6 not conected
7 not conected
8 not conected
9 to 16 flash
10 not conected
11 to 7 flash
12 not conected
13 not conected
14 not conected
Obs. In NT, nothing of the power supply...

S25FL064A flash:
1 to + 3.3v (power supply)
2 to + 3.3v (power supply)
3 not conected
4 not conected
5 not conected
6 not conected
7 to 11 NT
8 to 5 NT
9 not conected
10 to - 3.3v (ground power supply)
11 not conected
12 not conected
13 not conected
14 not conected
15 to 3 NT
16 to 9 NT

I'm using in NT sw the target "SB6120".

Thanks!

.

[lamp]

.

By # He means Pin 9 of Flash. Look At Picture.

Oh! my God...

.