DCT700 Problem

Newbie post here.
Post Reply
KevvKev
Junior Member
Posts: 22
Joined: Tue Oct 09, 2012 11:38 am

DCT700 Problem

Post by KevvKev »

Now I'm testing on a DCT700 and this is what I get

Copyright (C) 2010,2011,2012
USB JTAG NT 0.57a
Target: DCT700
-detect
IDCODE 41C5501D
Motorola 17500QK
IMPCODE 40404000
EJTAG V1, V2.0
DMA not supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 1480,1480

I have Tested over 30 dct700 with no Problem til now. I will be reading up on it that's a given so Thanks in advance..........
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

KevvKev wrote:Now I'm testing on a DCT700 and this is what I get

Copyright (C) 2010,2011,2012
USB JTAG NT 0.57a
Target: DCT700
-detect
IDCODE 41C5501D
Motorola 17500QK
IMPCODE 40404000
EJTAG V1, V2.0
DMA not supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 1480,1480

I have Tested over 30 dct700 with no Problem til now. I will be reading up on it that's a given so Thanks in advance..........
Why don't you Update to 0.59 and give it a try then to see if you have the same problem or not?
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

0.58 and 0.59 should not have anything to do with MIPS.
If all other boxes works, then this might be a true problem with the hardware.
1480 is 0x0001010010000000. You might have some pins short on the PCB.
KevvKev
Junior Member
Posts: 22
Joined: Tue Oct 09, 2012 11:38 am

Post by KevvKev »

CAPONE wrote:Why don't you Update to 0.59 and give it a try then to see if you have the same problem or not?
Thanks CAPONE and usbbdm you guys are Great I upgraded to 0.59 and it's all good
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

KevvKev wrote:Thanks CAPONE and usbbdm you guys are Great I upgraded to 0.59 and it's all good
Glad it worked out.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

usbbdm wrote:0.58 and 0.59 should not have anything to do with MIPS.
If all other boxes works, then this might be a true problem with the hardware.
1480 is 0x0001010010000000. You might have some pins short on the PCB.
Maybe NOT. LOL Looks like it was something corruped on his software, which was why I suggested he try to upgrade to 0.59..........

Like I like to say, Think out side the BOX........ ;)
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests