5101u. 5101n, help!!!!!!!

eltondapg · Post by **eltondapg** » Sun Apr 03, 2011 8:10 am

Hello! my friends users and moderators, I'm detecting a problem sb5101u, when I give the following command in the softwear 0:45 NT error: Copyright (C) 2010,2011,2012
USB JTAG NT 0.45A
Target: SB5102
flshdct-0
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 00ff, 00ff, 00ff

Now comes my doubt! I'm feeding the power to the external modem will be unique in this problem and because it 12v and 5v e need to do if the error is such as to make food with 5v and the place where to connect the 5v.
I try with several here including sb5101n and also of the same error, and one I'm wearing a pin with testclip that met here in the forum but did not believe that connection is poorly made. please anyone who can help me thank you very much, I will post some pictures as soon as possible

Post by **usbbdm** » Sun Apr 03, 2011 9:38 am

1. You need to see the software activated properly.
2. You need solder the pins properly. ISP is the key to get detected.
3. You need to apply external 12V to the modem.
http://www.usbjtag.com/jtagnt/modem/sb5101u.php

eltondapg · Post by **eltondapg** » Sun Apr 03, 2011 12:15 pm

thank you for the support!
but seeing as I just told you that the software is not activating correctly. I wish you would help me fix this!
so I click on 5102, me and looks like this:
Copyright (C) 2010,2011,2012
USB JTAG NT 0.45A
Target: SB5102

look at the details in debug, not leave it.
NO DEBUG usb connected.
ta so wrong?
how can I do?
download other software. since in the other he is, debug on, off

Post by **usbbdm** » Sun Apr 03, 2011 12:18 pm

If not activated you need to get the activation code first. Send email to request activation code.

eltondapg · Post by **eltondapg** » Sun Apr 03, 2011 1:04 pm

ACTIVATED! ja ja this because many modems as he did so do not know why he did not get the debug on the other as this only happens with the way 5102.
are left with NO DEBUG. WHAT will be?

Post by **usbbdm** » Sun Apr 03, 2011 3:02 pm

DEBUG mode is not for SPI programming. So it is normal to see NO DEBUG.

eltondapg · Post by **eltondapg** » Sun Apr 03, 2011 4:03 pm

then harder still now ta! why not some way of detecting ta and I went here the pinning of the forum and made an adapter cable with the flat usbjtag easier to get the connection and see if that right! follow the picture:

Post by **usbbdm** » Sun Apr 03, 2011 5:17 pm

I see no sign you are making soldering the ISP pin. Apply 5V might not work.

eltondapg · Post by **eltondapg** » Sun Apr 03, 2011 7:04 pm

I'm doing the following, put the software to order 5102,
testclip connect the chip to pin 1 of the following flash, then put the usbjtag the PC's USB port and connect in usbjtag ready software active, and there I put on the 12v external modem and wait 15 seconds to close ums in short spi pin and clear lights that light up are just there on February 1 Acez and a flashing, it ta sure I'm doing right!

eltondapg · Post by **eltondapg** » Sun Apr 03, 2011 7:09 pm

Pin 1 is the first being on top or underneath?

and excuse my ignorance because you are having lots of patience with me, I'm already embarrassed to bore you, sorry but I want to get them !!!!!!!!!

Post by **usbbdm** » Sun Apr 03, 2011 8:03 pm

Pin 1 on JTAG is red.
Pin 1 on the chip is lower left. You need to find the datasheet of the flash chip.

eltondapg · Post by **eltondapg** » Mon Apr 04, 2011 7:34 am

Please do not understand, what would datasheet and my pinagen this right by following a pin as you've indicated I had already done under the right pin, red corresponds to 1 and it was what I did, I feel I'm coming already la, I see you take some pictures for better verification, and see what I'm missing, because this my first and 5101u, others have been successful easy, but this has now become matter of honor!

eltondapg · Post by **eltondapg** » Mon Apr 04, 2011 3:32 pm

here's how I'm doing, please tell me if something is wrong !!!!!!!!!!!
I'm going crazy.

Post by **usbbdm** » Mon Apr 04, 2011 3:36 pm

The pictures looks OK.
If you have the pins matched properly there is no reason you cannot detect the flash.
You need to draw the diagram how you connect to the pins.

The software has a button yon can see how SPI is connected to the flash.
You should also use multimeter to check if it is reliably connected.

I used soldering instead use the clip and I do not know how reliable is the connector.

eltondapg · Post by **eltondapg** » Mon Apr 04, 2011 3:52 pm

then follow their recommendations will make a check on the pins of testclip SOIC8
only because I have left that option, and you and just have to thank. for the assistance.
I say the result tomorrow.

Falow !!!!!!!!!!!

5101u. 5101n, help!!!!!!!

5101u. 5101n, help!!!!!!!

Who is online