5100 Bricked! Help please!

This is JTAG to debrick any JTAG device. Modem, cable boxes, dish boxes routers.
Post Reply
NewIdea1219
Junior Member
Posts: 8
Joined: Sat Apr 27, 2013 1:14 pm

5100 Bricked! Help please!

Post by NewIdea1219 »

Hi everyone,

I have been reading for hours hours trying to debrick my sb5100 so I can get it back alive!

I tried the method 1 (poke) and method 2 already but no success. (10+times!!)
Have not try the 3.3v method, will be my last resort.

What's strange is that it will detect sometime and sometime unknown flash. (it's not my connection, i double checked many times!)

It will go all the way to sprogram 9fc00000 200000! But will get stuck when I program at normal speed. Then it won't detect flash again!!!

Keep in mind 2 modems get the same result!
Any advise or input, would greatly appreciated! Thanks!
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

This is most likely you have programmed wrong boot. Program firmware to boot will cause your modem bricked. Use 3.3 v might work for you
Again you need good boot or you will not fix your modem.
Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests