Bricked Cloud Box Sat Receiver

mrazzido123 · Post by **mrazzido123** » Wed Jan 14, 2015 2:52 am

Hello usbbdm =)

i have a bricked sat receiver

i found a jtag solution in the offical sat forum.

can i use usbjtag nt for this device?

here is the solution

http://www.cloud-ibox3.com/index.php/topic,351.0.html

mrazzido123 · Post by **mrazzido123** » Sun Jan 18, 2015 9:01 am

Found own solution

on back site from mainboard was the 4mb flash chip
and on front there was pins without chip

i try to solder and it workx =)

merkin · Post by **merkin** » Mon Jan 19, 2015 10:13 am

nice, but what about reading the parallel flash? what data is stored there?

mrazzido123 · Post by **mrazzido123** » Tue Jan 20, 2015 6:14 pm

merkin wrote:nice, but what about reading the parallel flash? what data is stored there?

when you flashed wrong bootloader / with clone detection over USB ,
box doenst boot any more . in the 4mb flash is the bootloader inside.
after flashing box booting and you can flash complete enigma2 fimware.

merkin · Post by **merkin** » Wed Jan 21, 2015 7:06 pm

ok you got lucky twice..
1. the pcb has the unpopulated 16-pin footprint
2. boot was stored on serial flash and not on the parallel flash

so the enigma OS is on the parallel flash.

USB JTAG

Bricked Cloud Box Sat Receiver

Bricked Cloud Box Sat Receiver

Who is online