SB6120 bricked
-
- Junior Member
- Posts: 9
- Joined: Sat Nov 26, 2011 8:07 pm
Thank you usbbdm
Thank you usbbdm only with your rom worked perfect. My modem is working now.
Thank you
Thank you
-
- Junior Member
- Posts: 638
- Joined: Fri Aug 20, 2010 1:47 pm
- Location: Some ware just like you.
- Contact:
-
- Junior Member
- Posts: 26
- Joined: Sun Apr 29, 2012 7:04 am
cann´t debrick 6120
i hve now this problem with the sb6120:
modem has forceware beta2.. all was ok next day i connect the powercable but no led´s no power nothing i try to debrick but no result i flashed the 8m boot noisyfirmware but nothing! i can connect to modem=
-flshdct 0
Found Address= 00000000 25FL064A
-ldram 0
-program 0 800000
Erase starts...
Erase time 00:00:43 (.375)
Program Starts...
Program speed 542.29 KB/s
Program time 00:00:15 (.875)
Program pass, if no further programming needed, power off/on the target
-cmpram 0 800000
Time 00:00:09 (.921)
Compare data OK
but my modem is still dead no leds!
Thank You for any Help
modem has forceware beta2.. all was ok next day i connect the powercable but no led´s no power nothing i try to debrick but no result i flashed the 8m boot noisyfirmware but nothing! i can connect to modem=
-flshdct 0
Found Address= 00000000 25FL064A
-ldram 0
-program 0 800000
Erase starts...
Erase time 00:00:43 (.375)
Program Starts...
Program speed 542.29 KB/s
Program time 00:00:15 (.875)
Program pass, if no further programming needed, power off/on the target
-cmpram 0 800000
Time 00:00:09 (.921)
Compare data OK
but my modem is still dead no leds!
Thank You for any Help
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
You should have made your own Thread, Rather than Posting on a thread that has Been DEAD for so Long.nimir wrote:i hve now this problem with the sb6120:
modem has forceware beta2.. all was ok next day i connect the powercable but no led´s no power nothing i try to debrick but no result i flashed the 8m boot noisyfirmware but nothing! i can connect to modem=
-flshdct 0
Found Address= 00000000 25FL064A
-ldram 0
-program 0 800000
Erase starts...
Erase time 00:00:43 (.375)
Program Starts...
Program speed 542.29 KB/s
Program time 00:00:15 (.875)
Program pass, if no further programming needed, power off/on the target
-cmpram 0 800000
Time 00:00:09 (.921)
Compare data OK
but my modem is still dead no leds!
Thank You for any Help
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 2
- Joined: Sun May 01, 2011 6:53 pm
hi men
hi usbbdm i have question can you tell me what i need to do because i take backup of my sb6120 original when i try to program in putty i have error (Connection refused ) but i have another backup and open fine in putty for program. i need you help soon as possible thanks.
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
You mean telnet for putty or serial? This just mean your firmware has the port/serial disabled.iory31 wrote:hi usbbdm i have question can you tell me what i need to do because i take backup of my sb6120 original when i try to program in putty i have error (Connection refused ) but i have another backup and open fine in putty for program. i need you help soon as possible thanks.
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Like USBBDM said, The port/Serial is Disabled, which in other words means The modem has Stock firmware.iory31 wrote:hi usbbdm i have question can you tell me what i need to do because i take backup of my sb6120 original when i try to program in putty i have error (Connection refused ) but i have another backup and open fine in putty for program. i need you help soon as possible thanks.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Who is online
Users browsing this forum: No registered users and 15 guests