Please post anything that you need to debrick in here.
-
- Junior Member
- Posts: 3
- Joined: Sun Dec 12, 2010 5:54 pm
The result is the same with IR set to 5 bits. The reason I believe it is 8 bits is because datasheet has following:
For boundary scan,
Amazon-S supports the following instructions: Bypass (Instruction Code = “11111111â€) Sample/Preload
(Instruction Code = “00000010â€) Extest (Instruction Code = “00000000â€) IDCODE (Instruction Code = “00000100â€)
Clamp (Instruction Code = “00000110â€) HighZ (Instruction Code = “00000111â€). The ID code value is 10XXX083H,
XX could be 152,153.
For boundary scan,
Amazon-S supports the following instructions: Bypass (Instruction Code = “11111111â€) Sample/Preload
(Instruction Code = “00000010â€) Extest (Instruction Code = “00000000â€) IDCODE (Instruction Code = “00000100â€)
Clamp (Instruction Code = “00000110â€) HighZ (Instruction Code = “00000111â€). The ID code value is 10XXX083H,
XX could be 152,153.
-
- Junior Member
- Posts: 2
- Joined: Sat Oct 30, 2010 2:59 pm
WRT150N v1.1
Can i debrick a Linksys WRT150n v1.1 with the USBjtag NT, and how?
(p.s.maybe any one got a guide)
Advise,what should I buy USBJTAG NT selecting one 10 or 14 pin header?
Thanks in advance!
(p.s.maybe any one got a guide)
Advise,what should I buy USBJTAG NT selecting one 10 or 14 pin header?
Thanks in advance!
-
- Junior Member
- Posts: 142
- Joined: Sun Feb 07, 2010 7:51 am
get the 14 lots more uses with that you can always buy more off fleebay very cheap under $10 and ships from within statesMarmor wrote:Can i debrick a Linksys WRT150n v1.1 with the USBjtag NT, and how?
(p.s.maybe any one got a guide)
Advise,what should I buy USBJTAG NT selecting one 10 or 14 pin header?
Thanks in advance!
burp!
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
There is No USBJTAG NT 10 Pin. They all come with the 14 Pin Header.transitoryspace wrote:get the 14 lots more uses with that you can always buy more off fleebay very cheap under $10 and ships from within states
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 3
- Joined: Sun Dec 12, 2010 5:54 pm
Hi have done some more testing with different IR lengths and when it is set to 9 I get the following:
Target: LantiqEval
-detect
IDCODE 20152083
Lantiq Amazon-SE
IMPCODE 00000020
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0020
Using IR of 9 and giving search cmd it reports any returned data the same.
-search 80000000 8ffffffc 100000
Address 80000000 data=00000020
Address 80100000 data=00000020
Address 80200000 data=00000020
...
Address 8FD00000 data=00000020
Address 8FE00000 data=00000020
Address 8FF00000 data=00000020
So something is still not correct.
Gavin
Target: LantiqEval
-detect
IDCODE 20152083
Lantiq Amazon-SE
IMPCODE 00000020
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0020
Using IR of 9 and giving search cmd it reports any returned data the same.
-search 80000000 8ffffffc 100000
Address 80000000 data=00000020
Address 80100000 data=00000020
Address 80200000 data=00000020
...
Address 8FD00000 data=00000020
Address 8FE00000 data=00000020
Address 8FF00000 data=00000020
So something is still not correct.
Gavin
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
IR length will not work with the current software. Unless modify the software, the max length is 8 for the optimization of speed.gvoigt wrote:Hi have done some more testing with different IR lengths and when it is set to 9 I get the following:
Target: LantiqEval
-detect
IDCODE 20152083
Lantiq Amazon-SE
IMPCODE 00000020
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0020
Using IR of 9 and giving search cmd it reports any returned data the same.
-search 80000000 8ffffffc 100000
Address 80000000 data=00000020
Address 80100000 data=00000020
Address 80200000 data=00000020
...
Address 8FD00000 data=00000020
Address 8FE00000 data=00000020
Address 8FF00000 data=00000020
So something is still not correct.
Gavin
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Based on http://en.wikipedia.org/wiki/Linksys_routers#WRT610Nluciferxe wrote:I am wondering if anyone has the info needed to use usbjtag(The non nt version) to falsh a wrt610n?
I am in need of this if possible. I have bricked mine.
Thank you
This router can be JTAGed since it uses the Brodcom CPU. If you need help and has JTAG NT, wait after I come back and I can help you debrick it. But I might need you take some pictures for me so I can post it on my website as one more supported device.
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
luciferxe wrote:I am wondering if anyone has the info needed to use usbjtag(The non nt version) to falsh a wrt610n?
I am in need of this if possible. I have bricked mine.
Thank you
Its Clear from His Post Boss that He Has The Old USBJTAG, As He Mentions Above.usbbdm wrote:Based on http://en.wikipedia.org/wiki/Linksys_routers#WRT610N
This router can be JTAGed since it uses the Brodcom CPU. If you need help and has JTAG NT, wait after I come back and I can help you debrick it. But I might need you take some pictures for me so I can post it on my website as one more supported device.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 6
- Joined: Fri Jul 18, 2008 6:48 am
Yes it is the old usbjtag.
At this point I have added from the NT versions flash.xml and the other needed for usbjtag.def.
So flash.def and usbjtag.def have been edited to reflect the new hardware. I used the info from WRT54G8M.
I do however now know the CFE is 256k. Will the info from the TWRT54G8M.xml work to restore my CFE?
Just to mention. I do plan on upgrading really soon. Just got set back with medical bills and burying my mother 2 months ago.
At this point I have added from the NT versions flash.xml and the other needed for usbjtag.def.
So flash.def and usbjtag.def have been edited to reflect the new hardware. I used the info from WRT54G8M.
I do however now know the CFE is 256k. Will the info from the TWRT54G8M.xml work to restore my CFE?
Just to mention. I do plan on upgrading really soon. Just got set back with medical bills and burying my mother 2 months ago.
-
- Junior Member
- Posts: 4
- Joined: Sat Feb 07, 2009 11:37 am
Seagate Dockstar uboot
Hey guys, I have dockstar thats bricked and would like a script to debrick. I know its possible but not sure how to..., Thanks.
http://wiki.openwrt.org/toh/seagate/dockstar
http://wiki.openwrt.org/toh/seagate/dockstar
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
First you need to find the JTAG port and being able to detect the CPU. Then you need to find if existing XML will work with your device. The script is the last thing and optional.joedirtz wrote:Hey guys, I have dockstar thats bricked and would like a script to debrick. I know its possible but not sure how to..., Thanks.
http://wiki.openwrt.org/toh/seagate/dockstar
Tell us back if you can detect the CPU first.
Who is online
Users browsing this forum: No registered users and 3 guests