WRT54GS v1.1

This is JTAG to debrick any JTAG device. Modem, cable boxes, dish boxes routers.
devDelay
Posts: 5
Joined: Thu Jan 10, 2008 1:07 pm

WRT54GS v1.1

Post by devDelay » Fri Feb 22, 2008 5:33 pm

Hello. I have a WRT54GS v1.1 that is bricked. USBJtag identifies this as:

IDCODE 1471217F
Broadcom BCM4712
IMPCODE 800904
DMA supoorted
Found Address= 9fc00000 Intel 28F640J3

When writing CFE I must erase and then use sprogram for it to appear to write. However when finished it doesn't appear to do anything. CMPRAM is useful to let me know for sure this is true.

-sprogram cfe
Program Starts...
Program time 00:01:02 .081
-cmpram cfe
Compair data Failed address 9FC00000,target 00,PC memory 17

I was told by a friend that this has been acknowledged as not actually able to write data. Is there any kind of fix for this?

usbbdm
Posts: 8550
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm » Fri Feb 22, 2008 8:08 pm

Which version of software you are using? There are certain version of software that will cause some problem. If you use 0.21 you should have less trouble.

devDelay
Posts: 5
Joined: Thu Jan 10, 2008 1:07 pm

Post by devDelay » Sat Feb 23, 2008 9:16 am

I am using .19. I have downloaded version .21 but I don't see how that version will help the situation. The problem is the usbjtag.def for the WRT54GS. This WRT54GS has a 8MB flash for the Intel 28F640J3 controlled by a BCM4712 so it is a bit different than the definition written in by default. Any assistance editing this would be much appreciated. Thanks.

deniskacool
Posts: 5
Joined: Thu Jan 15, 2009 6:47 am

Post by deniskacool » Sun Oct 06, 2019 7:33 pm

I know this is old thread but since I got the same bricked wrt54gs v 1.1 with 8mb flash i figured i'll try here first...
tryed wrt54gs def along with wrtdebrick and wrt54g8mb but never got it to detect flash...
Copyright (C) 2010-2025
USB JTAG NT 0.86
Target: WRT54GS
-speed 0
-detect
IDCODE 1471217F
Broadcom BCM4712
IMPCODE 00800904
EJTAG V1, V2.0
DMA supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0000

the power light is blinking and lan light lights up when cable is pluged in is the state of this brick....
devDelay wrote:I am using .19. I have downloaded version .21 but I don't see how that version will help the situation. The problem is the usbjtag.def for the WRT54GS. This WRT54GS has a 8MB flash for the Intel 28F640J3 controlled by a BCM4712 so it is a bit different than the definition written in by default. Any assistance editing this would be much appreciated. Thanks.

Contract_Pilot
Posts: 4
Joined: Thu Jan 09, 2020 11:53 am

Re: WRT54GS v1.1

Post by Contract_Pilot » Mon Feb 24, 2020 9:02 pm

I have a G V1.1 I get an unknown flash type Also..

Broadcom BCM4702
IMPCODE 26DB6D32
EJTAG V2.6
DMA not supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum d3ed,c9ad

usbbdm
Posts: 8550
Joined: Mon Jul 18, 2005 9:33 pm

Re: WRT54GS v1.1

Post by usbbdm » Mon Feb 24, 2020 9:28 pm

Contract_Pilot wrote:
Mon Feb 24, 2020 9:02 pm
I have a G V1.1 I get an unknown flash type Also..

Broadcom BCM4702
IMPCODE 26DB6D32
EJTAG V2.6
DMA not supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum d3ed,c9ad
You can go online and I can try to help you remotely (chrome remote desktop).

Contract_Pilot
Posts: 4
Joined: Thu Jan 09, 2020 11:53 am

Re: WRT54GS v1.1

Post by Contract_Pilot » Mon Feb 24, 2020 9:34 pm

unable give remote access to that PC.

The flash is a AM29LV320DB-90EI

usbbdm
Posts: 8550
Joined: Mon Jul 18, 2005 9:33 pm

Re: WRT54GS v1.1

Post by usbbdm » Mon Feb 24, 2020 9:44 pm

Normally it should show DMA supported. So I need to issue come tap command to see if the data is right.

Contract_Pilot
Posts: 4
Joined: Thu Jan 09, 2020 11:53 am

Re: WRT54GS v1.1

Post by Contract_Pilot » Mon Feb 24, 2020 9:52 pm

How do i issue a come tap command?

usbbdm
Posts: 8550
Joined: Mon Jul 18, 2005 9:33 pm

Re: WRT54GS v1.1

Post by usbbdm » Mon Feb 24, 2020 10:04 pm

It will be tap 1 or tap 2 etc.
But the result needs to be interpreted.

Contract_Pilot
Posts: 4
Joined: Thu Jan 09, 2020 11:53 am

Re: WRT54GS v1.1

Post by Contract_Pilot » Mon Feb 24, 2020 10:39 pm

-tap 1
Eco :B26DDB26
-tap 2
Eco :B26DDB26

usbbdm
Posts: 8550
Joined: Mon Jul 18, 2005 9:33 pm

Re: WRT54GS v1.1

Post by usbbdm » Mon Feb 24, 2020 10:45 pm

That is not correct.

Post Reply