Usbjtagnt + openocd

JTAG software bug report.
Post Reply
yura717
Junior Member
Posts: 3
Joined: Sun Mar 15, 2009 4:22 pm

Usbjtagnt + openocd

Post by yura717 »

Hello,
Is USBJTAGNT will work withOpenOCD software?
http://openocd.berlios.de
Regards Yuriy
usbbdm
Junior Member
Posts: 8714
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Not yet but it will work with GDB. This is on the plan.
topo
Junior Member
Posts: 8
Joined: Tue Feb 24, 2009 12:29 pm

Post by topo »

usbbdm wrote:Not yet but it will work with GDB. This is on the plan.
Hi There! Any updates on this? Thanks! :)
usbbdm
Junior Member
Posts: 8714
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

topo wrote:Hi There! Any updates on this? Thanks! :)
No. But still interested?
The GDB support needs some target to play with. The MIPS was the one I initially played with.
topo
Junior Member
Posts: 8
Joined: Tue Feb 24, 2009 12:29 pm

Post by topo »

Yes. Definitely interested.

If you need some help I'd be more than willing to help. I work as a reverse engineer and I've implemented GDB RSP (remote serial protocol) quite a few times on spme weird places ;)
usbbdm
Junior Member
Posts: 8714
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

topo wrote:Yes. Definitely interested.

If you need some help I'd be more than willing to help. I work as a reverse engineer and I've implemented GDB RSP (remote serial protocol) quite a few times on spme weird places ;)
Do you have a suggest hardware platform to start with?
topo
Junior Member
Posts: 8
Joined: Tue Feb 24, 2009 12:29 pm

Post by topo »

We might start with a well-known like the SB5101 (although it's a bit outdated nowadays).

Ideally I'd aim to the any newer device (something w/DOCSIS 3 support) which is, where I think, people will have more interest.

If you have something in mind I'd be happy to listen.

Thanks for supporting the thread, even if this doesn't happen :)
usbbdm
Junior Member
Posts: 8714
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

SB5101 CPU does not have ICE feature.
Other modems do not have proper JTAG yet.
usbbdm
Junior Member
Posts: 8714
Joined: Mon Jul 18, 2005 9:33 pm

Re: Usbjtagnt + openocd

Post by usbbdm »

Anyone still interested openocd support?
I have installed openocd myself and find it might be possible to support openocd with u-Link NT,
sandrrei
Junior Member
Posts: 1
Joined: Thu Feb 18, 2021 7:25 am

Re: Usbjtagnt + openocd

Post by sandrrei »

usbbdm wrote: Sun Jun 28, 2020 10:13 pm Anyone still interested openocd support?
I have installed openocd myself and find it might be possible to support openocd with u-Link NT,
I'm interested
usbbdm
Junior Member
Posts: 8714
Joined: Mon Jul 18, 2005 9:33 pm

Re: Usbjtagnt + openocd

Post by usbbdm »

I have posted a video on youtube,
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests